The Combine Forum banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
11 Posts
Discussion Starter · #1 ·
Kicking the idea around about changing our nh3 setup from a Dickey Land Manager to a Raven accuflow. Just curious if anyone has any experience running the Raven with a Pro700 monitor. We VR our nh3. Is it reliable? How about accuracy and ease of use? Any input would be appreciated.
 

·
Registered
Joined
·
57 Posts
The Pro 700 monitor will work if it is set up right. Hopefully you trust your Case dealer to help you with this.

Last time I talked to CNH they said they were working on the software to get snap rate working on this monitor. Don't know for sure if it will be ready in the spring or not so you might have to live with the bouncing of the applied rate. What happens is if say you are set for 100 lbs/acre it will bounce between 95 to 105.

Your tanks when filling will work out though within the accuracy of the flow meter.

Hopefully this helps.
 

·
Registered
Joined
·
409 Posts
Raven is a very nice system to use, VR with the Raven off the Pro-600 works well, not the absolute easiest but enough experienced people out the now that very minimal issues with it now so don't be afraid.

In my experience all systems fluctuate the rate its just a matter of if you realize it or not because almost all monitors have a rate smoothing option turned on so you don't see the fluctuations.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top