The Combine Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
2,118 Posts
Discussion Starter #1
Re: 9760 dirty grain tank

Ours various on the Sieves from 4-6 Chaffer from 15-17 fan from 850-980 rotor speed from 780-950 concaves from 2-13 but you also have to remember we have roundbar concaves in with inserts so we are pretty aggressive, I think right now mine are at:

Sieve 6
Chaffer 16
Rotor 900
Fan 880
Concave 2

usually something in that ball park is what we use
 

·
Registered
Joined
·
321 Posts
Re: 9760 dirty grain tank

User Id 8950:

First off foul ball, your pic. link wont load.

Second of all, there's no need to be a dickhead about anything on here.

Personally, I don't give a big rat's a$$ what the pic. you supposedly posted looks like, I believe what Alex says and thats that. In a year like this with a ton of crappy wheat, I'd say its gonna be hard to get a near perfect sample anyway.

As far as I'm concerned, if you're gonna post stuff like this, just stay off here.

jd
 

·
Registered
Joined
·
588 Posts
Re: 9760 dirty grain tank

I have nearly the same settings as alex on our 9760 (06 MY).
Large bar with 2 inserts in the front.
fan 1000
bottom 5
top 15
rotor 800
concave 3
dockage at elavator - .4 %
 

·
Registered
Joined
·
5 Posts
Re: 9760 dirty grain tank

Sieve 4
Chaffer 14
Rotor 1000 rpm
Fan 1000 rpm
Concave 13-15

We run Small Wire Concaves with 1 cover strip on the front and 2 cover strips on the middle concave. (9750)
 

·
Registered
Joined
·
45 Posts
Re: 9760 dirty grain tank

Quote:but you also have to remember we have roundbar concaves in with inserts so we are pretty aggressive

When you say inserts, what do you mean and do you have any pictures??
 

·
Registered
Joined
·
111 Posts
Re: 9760 dirty grain tank

We have had crappy harvesting conditions as well here in ontario due to drought.. but haven't had a problem getting a clean sample with the 8010
 

·
Registered
Joined
·
2,118 Posts
Discussion Starter #7
Re: 9760 dirty grain tank

Quote:
Quote:but you also have to remember we have roundbar concaves in with inserts so we are pretty aggressive

When you say inserts, what do you mean and do you have any pictures??


I don't right now but I'll try to get a coule tomorrow before I head home.
 

·
Registered
Joined
·
3 Posts
Re: 9760 dirty grain tank

i'm having the same problem as well. trying to get a clean sample but seem to having too much rotor losses. running 5 plates at the front and
900 RPM rotor
950 fan
6 concave
15 chaffer
3 sieve
 

·
Registered
Joined
·
2,118 Posts
Discussion Starter #9
Re: 9760 dirty grain tank

Try Opening your bottom sieve up a little bit, as it will allow more air to pass through
 
1 - 9 of 9 Posts
Top