The Combine Forum banner
1 - 14 of 14 Posts

·
Super Moderator
Joined
·
5,268 Posts
Re: 9860 to 8010

That would be me.
Somehow there was two identical posts in the last 100, one at 9:15, one at 9:19, I checked to see which one was in the thread, then deleted the opposite one.
For a reason that mystifies me both of the identical posts at both times were deleted.
Sorry Torn.

Don Boles
 

·
Registered
Joined
·
106 Posts
Re: 9860 to 8010

Several farmers in my area run the John Deere guidance on the Case equipment. One farmer in particular has two GS2 systems and transfers them between 2 8010's, his WDX 1203 and his STX 435. He says you get the best of both worlds.
 

·
Registered
Joined
·
78 Posts
Re: 9860 to 8010

Has anyone on here ever done this before? We're thinkin about gettin an 8010 but we're 100% green on everything else and don't really want to have to learn a new system or pay for another new one when we'll have everything we need if it'll work.
 

·
Registered
Joined
·
560 Posts
Discussion Starter · #14 ·
Re: 9860 to 8010

Not technically true. You can drive (and even harvest) without a display installed, but you have no clue what your machine is doing. It would be like driving a car with no dashboard, idiot lights, etc.

Obviously you wouldn't want to harvest without a display, but it's nice to be able to at least move the machine without the display, if you've taken the display into the house for the winter, for example.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top