The Combine Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
809 Posts
Discussion Starter #1
Re: Grain loss questions

What are your concaves set at?

What position are the vanes in?

Where do you think your loss is coming from?
 

·
Registered
Joined
·
192 Posts
Re: Grain loss questions

if you are seeing green leaves i would pull out ever other wire in the 3rd concave to see if that would help. if that does then try the 2nd concave but i keep from doing it on the 1st concave. plus set the machine first then watch the grain loss moniter is the way i do it. sorry OLD school.
 
1 - 2 of 2 Posts
Top