The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
619 Posts
Discussion Starter · #1 ·
Re: Loud Knocking in shoe area.

Sounds like the bearings are out on the RH side. Remove the large drive pulley near the elevator remove slip clutch and inspect the bearings on the eccentric bell crank and behind the eccentric too(bearing has a hex inner race)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top