The Combine Forum banner
1 - 1 of 1 Posts

· Registered
133 Posts
Discussion Starter · #1 ·
Re: Setting up a cr940 with GPS

you'll need any GPS receiver. If you have an old trimble ezguide plus, they seem to work well because they're a reliable receiver. if you already have the datalogger you're 80% there. talk to your dealer and they can get you the proper adapter cable to hook a trimble gps to a NH datalogger. the datalogger and MDM software of the combine will both need to be updated to the correct versions so they will talk to each other
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.