have had problems with the beater at the end of the rotor plugging in white beans and soyabeans.Understand from john deere that there is a paddle kit that can be installed instead of the fingers and that there is also a speed up kit . Has anyone installed either of these and how well have they worked?
rear beater on 9560 kits
Join the discussion
Recommended Reading
-
Pattison foam lake
John DeereFirst dealership closes of the winter ? Saw this on twitter any reason this location is closing? I thought foam lake was a pretty strong farming area- 11
- 1K
-
2630 display vs 4640 display in S670
John DeereConsidering purchasing 4640 display with auto track as opposed to activating auto track on the 2630 display. Any experience using 4640 display on combine?- 4
- 339
-
John Deere 9500 Combine
John DeereWe have a John Deere Combine 9500. from 1996. What is the problem when you switch to to half engine speed nothing happens? it only work on idle and full speed.- 2
- 260
-
Jens Haslund-Thomsen · updated
-
9860STS engine won’t rev over 270RPM
John DeereI have a 9860 STS runs but only just at 270RPM checked fuel coming out of tank and screen there and fuel filters they seem ok, any other suggestions? What fuel pressure should I be getting at the filter housing? Any help much appreciated.- 1
- 161
-
9860STS engine won’t rev over 270RPM
John DeereI have a 9860 STS runs but only just at 270RPM checked fuel coming out of tank and screen there and fuel filters they seem ok, any other suggestions? What fuel pressure should I be getting at the filter housing? Any help much appreciated.- 0
- 87
Join now to ask and comment!