The Combine Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
Having problems with rotor loss in 3000 lbs canola with 9660sts, can only reach 2 mph. Have two narrow wire concaves in the first two positions and one wide wire concave in the rear. Concave clearance is at 19 and rotor speed is at 650 (standard rotor) and I have the separator grates installed to balance the chaff load on the shoe. Thanks in advance.
 

·
Registered
Joined
·
77 Posts
Just going off my dim memory, I run the concave at 30 and rotor faster than 650. All narrow wire. I can check my settings tomorrow if you need.
 

·
Registered
Joined
·
31 Posts
Discussion Starter #5
Thanks guys, I will try both settings and see how it works. I am taking it straight so the straw is not very dry.
 
1 - 6 of 6 Posts
Top