The Combine Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
57 Posts
wetfarmer, i run an amazone spredaer on economy pto on a T6050 NH and often run the spinners at 750rpm to get the spread. About once a year i may break the shear pin drive but not a problem, so on 1000rpm pto at reduced engine rpm shouldn't be a lot different.
Can you hydro drive the spinners with 1 hydro motor on the drive shaft? A couple of blokes my way have done that.

Cheers
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top