The Combine Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
35 Posts
S680 Rotor 550, Concave 30 - 32, Chaffer 10, Seive 10, Fan 1020, 50+ Canola 5MPH Horse power will be limiting factor. Feeder on slow. move feeder drum to Corn setting. Assuming good dry conditions
 

·
Registered
Joined
·
35 Posts
They have a good optimization team at South Country Equipment that helped get to those settings. Had losses down to less than .75 BPA. Pod pieces in the sample but dockage was less than 2%. My view if the Canola sample is too clean probably throwing out the back.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top