The Combine Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
37 Posts
If you look up under the fuel tank, up towards the beater, there are 2 slots/holes in the sheet metal. I figured out that the stuff was coming through those holes. Just clean off the metal and put on a good patch of several layers of gorilla tape.....problem solved.

Tape will eventually blow out, but should last several weeks. Give it a try.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top