The Combine Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
212 Posts
Most likely buildup of 'sap' from corn stalks that make rollers on shifter rods not roll smoothly in the cams that are operated from the cable. 04' 75 happens every year. can clean up with water or scrape out cams with some sort of screwdriver. Don't use any lube it will only make a bad situation worse. Once it breaks loose will work for quite a while again. good luck
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top