The Combine Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
hey everyone, we purchased our first Seedmaster this summer with NH sc380 tank. We also bought a new to us 2013 versatile 550 to pull it. I have no experience with a Seedmaster but realized it needs a return line for the drill and a return line for the tank. According to the manual the drill return cannot have any restrictions whatsoever and i have also heard not to tee one line into the other. Does anyone have any experience with the Versatile/Seedmaster combination and what would be the best way of running a second return line?

thanks in advance
 

·
Registered
Joined
·
107 Posts
would recommend following there advice and running a second case drain on your tractor. our dealer tried a T into the fan case drain at the back of our tractor (Steiger 485, seedhawk). first tyne lift there was enough pressure to force oil back through the fan case drain right across the bar to the back of our cart. luckly our seeder had a pressure relief dump line that released the oil to the ground. This would very quickly destroy your fan pump.

Follow your factory drain line, place a T as close as possible to tank and copy it back again.
 
1 - 2 of 2 Posts
Top