The Combine Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
117 Posts
Discussion Starter #1
Got problem either i,am cracking the corn or not getting it off the
cob.
My concave is at 5 Cly at 350 and lot of cracked corn.
Then i tried the concave at 6 Cly at 400 and it not getting it
off the cob.
And no i don,t have filler plates.

The kernels are big and round i don,t have this problem
when the kernels are flat.

With out the filler plates how would you set it.

P.S. the moisture is 18%.
 

·
Registered
Joined
·
2,118 Posts
Try slowing the cylinder down a little bit, leave the concave a little tighter and slow the cylinder down... Just my best guess at the weather
 
1 - 3 of 3 Posts
Top