The Combine Forum banner

21 - 25 of 25 Posts

·
Premium Member
Joined
·
5,389 Posts
If you are over loading the top sieve you need to put filler plates in the rotor grates. It also helps to decrease the threshing by dropping the cylinder speed and increasing concave clearance. How many sets of filler plates are you running?
 

·
Registered
Joined
·
449 Posts
I am running the factory electric covers and there are two sets and both are closed.

Cylinder 450 rpm
Rotors 550 rpm
Concave 25mm
Tm6 top sieve 8mm
Bottom 1mm
Feeder house at 350 rpm
APS plates open

Top sieve is loaded with wet green bits of mustard stalks. Yet I'm getting a few ripe pods in the hopper that are not threshed.
 

·
Premium Member
Joined
·
898 Posts
780 can't get over 700bu/hr without huge losses in dry canola.

Electric filler plates closed plus 3 more blocked off.
APS closed
18mm and 450 rpm on concave
550 rotor
Sieves 12 and 8.

Have tried every setting I can an am lost. Sieves and rotor throwing over

No Cemos on this unit, it's a rental.
 

·
Registered
Joined
·
340 Posts
Lexion Combine Wrecker

Looking for combine wreckers that may have Lexion parts Canada or USA. Need circuit board panel
 
21 - 25 of 25 Posts
Top