Wondering if anyone can give me some information about options for the spreaders on the '88 series machines, making a tour of the mid west this week and stopped at grand island today on our way through. Yhry had a 5088 sitting out front that had the chaffer spreader underneath, attached to the axle. Also thetail board had adjustable sideboards attached to an electric motor, I am thinking for incab adjustment. Got some pictures but haven't loaded them on to the computer yet, will see what happens this weekend I will get them posted I promise. As a side note i should add it looked completely different than the '20 series does, any knowledge floating out there?
Spreader options for 88 series
1 - 2 of 2 Posts
Joined
·
998 Posts
This sounds like the European spec. spreader system. I believe they are making them all like this now. Pretty much a twin cyclone hydraulic drive spreader, standard twin spreader and tail board. Works well. Had a lot of the 88 machines come into Australia like this last season.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Spx 3185 wheel bearing
Case IHI’m changing the wheel bearings on the front of our spx 3185 and I am having a hard time finding any information on a torquing the new bearings.. any help would be appreciated thanks- 1
- 62
-
Absk · updated
-
2388 vs 8010
Case IHThinking of purchasing a 06 2388 or 8010 to help with harvest next year. Already have an 8230. What are the pros and cons of each?- 5
- 778
-
pro 600 still supported?
Case IHis case IH still supporting the 600 pro? I was told they are not, anybody have any information- 3
- 123
-
Magnum 240 CVT Recommendations
Case IHI used to be a Case guy but, after having horrendous luck with some red/blue stuff in the early 2000's, I switched to Green and haven't looked back, but, now I'm looking at a Magnum 240 CVT with suspended front axle because my 8130 is ready to go down the road. I can't find anyone who is or has...- 0
- 78
Join now to ask and comment!