The Combine Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
152 Posts
Discussion Starter #1
This tractor is "steering ready". To hook up a X 30 I think a AGI-4 and ACU-1 is needed. Is this correct? Any other suggestions for GPS would be appreciated. Trimble??? Or if anyone can point me to a dealer that sells both Bourgault and Versatile would be great.
 

·
Registered
Joined
·
553 Posts
Steering ready means it has the steering valves in the hydraulic system, and has the auto steer button on the console wired and ready to go. Just buy your auto-steer brand of choice and easy install yourself. I went with Outback because it was cheapest and has everything I need (all I care about is back and forth with my hands off the wheel and with minimal overlap on the implement I am pulling). Works well.
 

·
Registered
Joined
·
152 Posts
Discussion Starter #3
Ok, I have Outback S3 now but wanted something more common in case of a breakdown. The Outback system doesn't drift like the Trimble in the Case. You can leave it for a week and the A-B Line is still in the same place. Not so with the Trimble, it will drift over 100 inches in a few hours.
 

·
Registered
Joined
·
1 Posts
Full Line Ag out of Saskatchewan is a versatile and bourgault dealer. Outback is a simple plug and play. Topcon will work well too just a bit more labor and pain for support.
 
1 - 4 of 4 Posts
Top