The Combine Forum banner
1 - 1 of 1 Posts

· Registered
110 Posts
McFarms, I would say that you need to drain the hyd. oil from the little cover underneath the feederhouse. There are 3 bolts on the reverser right above the safty stop. take them lose drain the oil from the cover and tighten the three again. There is probably oil bypassing an o-ring and not letting the reverser engage. There is a pip for this problem.
Good luck,
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.