The Combine Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
247 Posts
Discussion Starter · #1 ·
2010 STX 435 A/C quit working in auto & manual mode. Cab blower works. Can tell fan speed increases trying to cool cab but no cold air comes through vents. All fuses are ok underneath RH console (there is no A/C fuse underneath). Any ideas where to turn to next?

I haven't tried to see if the heater works. A/C worked great during seeding time this spring and while pull dozing this summer. Now this fall it quit.
 

· Registered
Joined
·
652 Posts
Check to see if your heater will work. It seems like there has been some issues with the thermostat to run in the cab that others have mentioned in the past. Otherwise maybe your refrigerant level is low in your system is low and needs a charge. Our STX 435 has a slow leak that we have to recharge the system at least once a year to have cold air come out.
 

· Registered
Joined
·
247 Posts
Discussion Starter · #4 ·
I'm thinking it's the thermostat or ATC module. Drove it the other day when it was 32C outside. A/C worked for about 5mins. Then turned it to hottest setting and still never cooked me out of the cab. Played with temp control turning it from hot to cold settings & switching backing forth from auto to manual mode. After 10 mins the A/C started working again and stayed working.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top