The Combine Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I ask for help. We have Lexion 760TT installed sunnybrook cylinder.
I can’t choose bars on the cylinder.
How long will work BARON bars last?
Who replaced respond?
 

·
Premium Member
Joined
·
8,114 Posts
Pretty sure my Sunnybrook cylinder has boron treated rasp bars. After almost 900 separator hours they are in excellent condition. Under similar conditions a regular set of Claas bars will be wore out at around 1600 hours. I would get the boronized bars.
 

·
Premium Member
Joined
·
5,330 Posts
If you are in rocks the boron is not hard and the bars will get beat up pretty bad. When they boronize all the heat treat or hardness is taken out of the metal. I wish they offered heat treated hardened bars. If you do not have rocks or do not cut on the ground a lot then the boron should work well and wear longer than normal ones.
 
1 - 3 of 3 Posts
Top