[bjtjjl]

Wanting to modifiy ladder to allow tractor to turn sharper. Pulling a 33' protill and you need a lot of headland the way it is now.

I have seen a post/thread of someone talking about this but can't find it. Is there a kit or does someone have a pic of what they have done?

Thanks

 

[Jason Hildebrand]

I think that was in the Case quadtrac vs NH Smartrax tread. Basically on the door side you cut the bottom mount and move it closer and the ladder will pivot on the top bolts, the ladder on the other side just gets cut off, removed 1-2" and then welded back on. I have a NH smarttrax but haven't done the mod, probably won't either. I will look for the thread.