The Combine Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
87 Posts
Discussion Starter #1
Plumbing up boomspray hydro drive hoses,
Pressure out of remote 1.
Return line bigger diameter went straight into back end on top above remotes,(27mm fitting) as per manual.
The small case drain line,nothing in manual showing an inlet port for this,is there another bung in the back end somewhere I can just tap into,or will I have to T into the bigger return line.
Hope that makes sense..thanks
 
1 - 1 of 1 Posts
Top