The Combine Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
The top display on the cornerpost of my 9650sts is going crazy with digital mumbo jumbo. Combine was upgraded two years ago for 600 series head and got the top display which shows reel resume, contour master, header hyd. downpressure, etc. Deere service tech let me try a putting in a used one he had, but that one showed the same digital crap when I started the combine. The other two displays below it on the cornerpost are reading fine. Any suggestions what else it might be?
 

·
Registered
Joined
·
17 Posts
Discussion Starter #2
Yeah, there is a board on the back of the display. When I swapped it for the borrowed one, I swapped the whole thing (display with board attached to the back of it). Didn't make any difference.
 

·
Registered
Joined
·
139 Posts
Your display itself has failed, if your other displays would show multiple icons that normally isn't there , then your motherboard has failed.
 
1 - 5 of 5 Posts
Top