The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
171 Posts
Discussion Starter · #1 ·
A rock found its way up to the impeller/ feed accelerator/ rock trap on one of our 9770's is there a torque on the 15 mm head bolts that hold the supports onto the cast ring on the impeller shaft as well is there one for the 18 mm head that go on the leading edges and have the "teeth" on them that also bolt the sections to one another?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top