The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
My tr85 shows all shafts are stopped , Horn with all lights burning steady The digital stuff up top works OK. What could cause this? I don,t think replacing the monitor will help because my tr70 does the same thing. I replaced the monitor with a known to be good one and it did not help. The stone trap lead and the chopper lead seem to have different features It just acts like the whole harness is shorted out TIA Weldfixer
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top