The Combine Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter · #1 ·
Hello, new here. I have recently sold my TR85 and bought a TR86, (mostly wanted the Terrain Tracer since I already had a 973 header). Have a problem with the foot brakes. I bled the slave cylinders and adjusted the free travel, but seems like after I use the park brake the brakes won't release and drag and I have to bleed the cylinders to get them to release fully. The regular brakes work fine and I have no problem until I use the park brake!
I've lubricated all the pins and the cable and the cable is sliding fine. Also the return springs seem to be fine. Anyone else have this problem? Thanks!
 

·
Registered
Joined
·
105 Posts
Discussion Starter · #2 ·
Guess I stumped everyone here, but I think I have the brakes fixed. I replaced the return springs on the park brake linkage and bled everything from the master cylinder down and readjusted the brake free travel and it seems to be OK now. The old springs were about 1/2" longer than the new ones.
 
1 - 2 of 2 Posts
Top