The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
923 Posts
Discussion Starter · #1 ·
I know it seems that consensus is that Michels are the cadillac of tarps. But to tell you the truth there has to be something better than that stupid spring and cable system they use. It seems that the cable wears through the cap near the spring if not turned regularly, or the cables come off the plastic roller piece if it goes over a pile, or not rolled up straight etc... To tell you the truth I am sick of replacing the cables, plastic roller etc... . But all that being said I have never had trouble with the tarp itself

Just looking at the shurloc tarp and the arm it has in the middle it seems like it would have none of the problems the michels tarp has. It should also be able to keep a better down force on the bar with more vertical force pulling the bar down as you roll it. I am sure there are problems with this system that I am missing.

Thought/opinions
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top