The Combine Forum banner

wheel spacer ?

1905 Views 2 Replies 3 Participants Last post by  wheaty75
What are your feeling on wheel spacers?

I am thinking of a set of 6" on each side for a 9790 Massey.

They would put the 30.5's just a tad wider than the ladder.

I thought you Gleaner guys could give me some input since they are the same final drives

1 - 1 of 3 Posts
don't worry about the finals, about only that goes wrong is oil leaks and don't happen often. gleaner ladders go outside the tire so no has probably tried it unless they put longer landing on, however 6 " is a long way from final not to mention 9" bolts. i am putting 4" spacers on a john deere and need 6 3/4" bolts, may worry more about breaking bolts
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.