The Combine Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
52 Posts
Discussion Starter · #1 ·
stalled out my pickup belts a couple times on my pickup header on my 860. when this happened all the lights flickered, then one time the lights went out and wouldn't come back on for maybe 10 minutes. luckily I had some auxillary lights on a separate switch to see where I was going... just wondering why it does this
 

·
Registered
Joined
·
25 Posts
Your lights run off a breaker if I remember correctly. If for some reason there is a large draw it will trip the breaker and lights will go out. Once the breaker cools it should come back on. Do you have something else drawing power from somewhere down stream of your breaker?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top