With the amount of hydraulic power that these big 4wd have now, is it possible to beef up the power unit on a grain cart by running a bigger hydraulic drive motor, in order to make it comparable to a pto driven cart. The reason I ask is that used 4wd with pto's are tough to find in my area.
dwh039
Joined
·
1,142 Posts
we have a fully hydraulic grain cart and it work very well. we have been running it on a 7800 and it has enought oil to run it well but lacks the power to pull 22t along in the paddock. our bin unload as quick as any pto bin we have been beside. works well for us anyway
Joined
·
1,142 Posts
ironseller we harvest wheat barley sorghum some corn we people plant it. but mostly wheat barley and sorghum. as for the bin it is not a factory bin we have put our own hyd drives on with the help of the local hydraulic blokes in Toowoomba. We also have a pto bin not as big but same size auger. i dont know about a factory made hydr bin but our bin works very well.
Joined
·
1,142 Posts
dwh039 yes you can change the motor to make the cart work as well as a pto. it didn't cost a lot about $3000 thats aussie but it is worth it no ptoshafts no chains. if you have a hydraulic specialist in your area talk to them. ours is on 2 remotes with a high flow dump line straight in to the transmission.
Joined
·
1,142 Posts
dwh039 taken a while to get back to you keep forgeting to look at the motor it is a char lynn 104 1033 006 hope this helps you to find something that works.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
