Attached my 8200 flex head to the combine today...went thru the header calibration that is in the combine manual...after I finished it gave me a error code 15 (left sensor failed calibration) and error code 25 (right sensor failed calibration)...Any help or thoughts would be greatly appreciated....
drf
what voltage do you have when the header is on the ground you should have .8 to 1 volts fully raised should be 3.8 to 4 volts anything outside of those parameters will pretty much fail calibration
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
