S690 powercast issues

Justafarmer12921 · Sep 9, 2025

Im having issues getting chaff and straw spread out the right side of the machine.

It throws it out the left perfectly but hardly anything goes right. I have the power cast with the two rotating discs with fins.

All the fins are in tact and both spreader spin at the correct speed. I have also tried moving the diverter to the right but it’s not making any difference.

Anyone else have this issue and what was the solution?

8850Champion · Sep 9, 2025

My guess is a separator grate blew out and it causing all your straw to be dumped on one side

Justafarmer12921 · Sep 9, 2025

Just checked. All of the separator grates are there

ricefarmer09 · Sep 9, 2025

There are some fins on the back sheet that the discharge beater throws onto. They can be adjusted. I've also seen some directional pieces mounted on the bottom of discharge beater grate. I would check your fins position first as there may be an issue there.

white owl · Sep 9, 2025

Key sheared on motor to spreader slipps at load

goalieguy847 · Sep 9, 2025

But then it would alarm low speed... had that issue last yr. If that IS the problem... call deere and have them fix it. Its a horrid job to replace that back motor.

white owl · Sep 9, 2025

Take a ling die grinder and grind the web out so to put a socket on bolt
The turn spreader to the next we do it in two hours

S690 powercast issues

Our Vendors

Top Contributors this Month

Recommended Communities