on my 1020 head for some reason my auto header height is not working. actually when i turn the knob to float and push the joystick down button it wont even go down automatically, it will go down as long as i hold the button. only way i can run head is switched turned to manual.
so where do i need to strart.
i lubed up all the points and the rod underneath head works freely. and the Pot arm is facing forward. i made sure i had the plug in the correct way.
Thanks
so where do i need to strart.
i lubed up all the points and the rod underneath head works freely. and the Pot arm is facing forward. i made sure i had the plug in the correct way.
Thanks
