I have been asking case for that for years as well. A couple flashes isn't long enough to catch the cart operators attention

 

Must just be a firmware issue. Our 2012 7120 keeps the beacon on at 3/4, at least when the headlights are off. At night they flash a few times and then turn off until full.

 

Just put the top senser next to the 3/4 one

 

my 7230 has a switch to change from staying on after 3/4 full to running 10 sec and going off till full

 

Where is the switch located on your 2012? I'm more concerned about night time that the beacons stay on because at least during the day the cart operator can easily see if the combine is getting full.

 

I'd like to know how to turn them off!!!!

 

I recon that case have it screwed up..
During the day time the 3/4 full stay on, sot he chaser driver thinks your full.
At night 3/4 bin flashes several times then off which is good because its very annoying for the driver and others in the field to have flashing light on all the time, thats 1 plus for Case
new holland machines running accross the rd, at night , 3/4 bin flashes few times then off for say 30sec then flash a few times and so on until full, i presume they flash more or full on when full.
Im sure that an update would allow for some user preference setup, cant wait to see that

 

My 7230 lights are on more than off good problem 230 bu. corn 18% moister 6 mph 8 row head turns out 3500 bu. an hour life is good.