What concaves (small grain or large grain) should you use when harvesting Milo (grain sorghum)? Also what settings for rotor speed and threshing aggressiveness on the cocaves?
kengwatson
about 550 rpm rotor, small wire concave in front, then two large. followed by keystock grates.
We use three large wire concaves and keystock grates. I'm not sure about 1420s but I'd say 550rpm on the rotor is as good a place as any to start. Start with concaves at 4 or 5 and adjust from there. You want the heads to come out the back clean, but whole.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
