[Jeff-C-IL]

I looks like you are getting an error for both Reel raise/lower & Fore-aft. That tells me that its likely a wiring fault to those sensors. Try unplugging one of them and measuring across the outer two wires (A to C) - you should get 5V. If not, you have a wire problem. NOTE: there are many other sensors on the head that use this same 5V & ground wire, so most likely the fault is in the wire to these sensors.

You can read those sensors on

• Reel F/A - LC1-25
• Reel U/D - LC1-26

As noted, they should be 0.5-4.5 and change as the reel moves.

Unfortunately I do not have access to look up those fault codes:

• 523555.07
• 523586.07