I'm not sure what the specific brand is that would be getting marketed through All States but I've generally had good luck with the aftermarket brands. Up here the price spread wasn't all that great and most were within $20 a belt of the JD price. Another thing to consider is if the belts are coming assembled, or if you have to install the teeth.

 

Not sure what size Your JD belts are but I have a new set of 8 front belts with teeth and the 8 matching non tooth drapers for a Victory Super 8 PU. They might be too short for a JD but thought I would give it a try. Both belts measure 17 1/2" wide by 44" long and have the leg bolts to join ends. Traded the combine that they fit a few years ago so do not need them. Would take $1100 for all. They came from Fyfe Parts, do not recall a brand but were $13-1400 a few years ago.

 

I am looking for draper belts for a draper header not a pickup header.

 

The wcco raptor belting looks very impressive. I had some belting from prairie belting in Anthony KS, that never would tighten right on my 2052.

 

I'm running a set from Abilene machine, got all three for the price of one, have 2500 ac on them so far no problem

 

I feel your pain. Few years ago pickup drapers, 180 bucks each. Know 365, im still sputtering