[Rafaur]

This New Holland seems longer than CR and shorter than CX

There was also a hybrid Massey Ferguson Delta / Fendt X-Serie - Machine of the Year 2014

 

[Rafaur]

It looks like CH has nothing to do with TF design

 

[Don Boles]

View attachment 160149

It looks like CH has nothing to do with TF design

Sure?
Twin flow split straw exit, just like the TF, some heritage creeping in.
Or was the TF longitudinal rotors?
Width constraints with this setup, unless the feeder isn’t very wide.
Interesting though, thanks.

 

[Rafaur]

Sure?
Twin flow split straw exit, just like the TF, some heritage creeping in.
Or was the TF longitudinal rotors?
Width constraints with this setup, unless the feeder isn’t very wide.
Interesting though, thanks.

This picture shows TF, where the separator is kind off Gleaner style

 

[Don Boles]

This picture shows TF, where the separator is kind off Gleaner style

Ah, you tricked me, well done!
Never seen the internals of a TF before, obviously.

 

[the donkey]

THE NEW CH NEW HOLLAND IS OUT

 

[chaffdog66]

View attachment 160148

This New Holland seems longer than CR and shorter than CX

There was also a hybrid Massey Ferguson Delta / Fendt X-Serie - Machine of the Year 2014

 

[torriem]

Definitely longer than the 8250 and CR10.90 with tracks. At least 18 inches longer, if not more.

 

[Daner]

Looks like they added a panel in between the caseih side panels.

 

[torriem]

I think the CaseIH panels look nicer than the NH ones, and they are easier to open. Yellow versions would look pretty good. Maybe this means the new hybrid will be available in red or yellow, otherwise identical.

If you look closely at the teaser image of the insides, it looks like some art department just merged two images together. There's no means of getting the crop material from the cylinder into the rotors. It's definitely not showing how it really is inside, clearly.

 

[kevlar]

I'd be even more surprised if I could afford it! 😂

 

[The_G]

I'd be even more surprised if I could afford it! 😂

You're on the wait 20 years before it's affordable equipment buying plan too?

 

[KWO]

It could be a yellow cabin on a red combine, that will trick you

 

[Rafaur]

 

[Grumpie]

pfff finally a New Holland claass

 

[Rafaur]

New Holland had something like this in the 1980s in the TA78 pull-type 😅
I think John Deere was next with the CTS
(Viewing a thread - If you ever wondered what a Deere CTS separator looked like.)

I wonder why AGCO has withdrawn from this type of hybrid?

 

[torriem]

Interesting picture @Rafaur. Still doesn't show how the material is supposed to enter the rotors after passing the beater. Something is definitely missing from that picture. Maybe it's a patent-pending secret that makes the CH different from Claas.

 

[Cfarm]

Looks like there’s a cavity on top of the rotors and the crop gets thrown up there by that second smaller beater.

 

[torriem]

Could be. Will be interesting to see how they divide the material and how it's all directed into the rotor initial flighting.

 

[Don Boles]

Looks like there’s a cavity on top of the rotors and the crop gets thrown up there by that second smaller beater.

A rather violent direction change, cylinder to rotors, can you say tough flax and wrapping?!